Quoizel KY1716IB Kyle - Manual (Page 3)

3 OF 3
STEP 6
:
a Place the Spacer Tube, the Check Ring, the Shade Stop,
the Shade, the Plastic Washer and the Flat Washer over
the end of the Nipple with Hex Nut in turn. Secure them by
threading the Hex Nut (1/8 IP) onto the end of the nipple.
Tighten gently until snug.
.
INSTALLATION INSTRUCTIONS
STEP 7
:
a Place the Cap over the Nipple extruding from the bottom
of the Shade. Secure it with the Finial. Hand-tighten until
snug.
.
STEP 8:
a Install correct bulbs referring to fixture markings and or labels for maximum wattage . / .
. . .
Your installation is completed now Restore electricity Retain this sheet for future reference
Nipple with Hex Nut
Nipple
Finial
Spacer Tube
Check Ring
Shade Stop
Shade
Plastic Washer
Flat Washer
Hex Nut (1/8 IP)
Cap
Shade
STYLE NUMBER KY1716IB :
STEP 5
:
a Screw the Hex Nut end of the Nipple with Hex Nut into the
Coupling underside of the Fixture Assembly. Using pliers,
thread the Hex Nut against the Coupling and tighten until
snug.
.
Nipple with
Hex Nut
Fixture
Assembly
Coupling