Quoizel TFJD1718ML Jewel Dragonfly - Manual (Page 5)

Assembly Instruction Sheet #IS-TFJD1718ML
For Style TFJD1718ML
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
5of5
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
, .
. .
2013 QuoizelInc.
Figure 7 STEP 6 Install Shade to fixture
-
A. Place the Spacer (I), Check Ring (J) and the center hole
on the Shade (K) over the Stem 4” L(G). Thread the 1/8P
Hex Nut (N) onto the Stem 4”L (G) underside of the Shade
(K). Hand tighten until sung.
B. Attach the Loop on the end of the Side Chain (H) to the
Hook on the side of Canopy . Attach the Loop on the other
end of the Side Chain (H) to the Hook inside of the Shade
(K).
Figure 9 STEP 8 Install Bulb
-
A. This fixture uses standard bulb with a standard screw base.
Maximum 100 watts.
B. Insert bulb and screw properly into place.
Your fixture is now assembled and ready to use.
Enjoy!
Bulb
Socket
Canopy
Socket
Assembly
Stem 4”L
Hook
1/8P Hex Nut
November2013
Spacer
Check Ring
Loop
Loop
Side Chain
Hook
Shade
Figure 8 STEP 7 Attach the Cap and Finial to fixture
-
A. on the
proper location, place the Cap (L) over the Stem 4”L (G),
secure with the Finial (M) Hand tighten until sung.
Thread the 1/8P Hex Nut (N) onto the Stem 4”L (G)
.
Shade
Shade 4”L
Cap
Finial
1/8P Hex Nut