Installation instructions, Step 2, Step 3 – Quoizel DH1722AN Duchess User Manual
Page 2: Step 4, Step 5, Step 6

2 OF 2
INSTALLATION INSTRUCTIONS
STYLE NUMBER DH1 718AN,DH1718PN,
:
DH1722AN,DH17 22PN
WHITE OR RIBBED
BLACK OR RED WIRE
(
)
FROM HOUSE
GROUND WIRE
GROUND WIRE
FROM HOUSE
FROM FIXTURE
WHITE OR RIBBED
FROM FIXTURE
FROM HOUSE
FROM FIXTURE
BLACK OR SMOOTH
STEP 2
:
*
(
)
.
.
.
(
)
(
)
.
(
)
(
).
.
.
Use Wire Connectors not supplied to connect the
wires
a
Connect the House Ground Wire to the Fixture Ground
Wire.
b
Connect the House White
or Ribbed
Wire to the
Fixture Supply Wire White or Ribbed Side .
c Connect the House Black or Red
Wire to the Fixture
Supply Wire Black or Smooth Side
d Wrap each connection with approved electrical tape and
carefully stuff all of the connected wires into the Outlet Box
Mounting
Screw
Ceiling
Canopy
Socket Cluster
Stem assembly
Stem assembly
Flat Washer
Shade
Flat Washer
Cap
Mounting
Ball
STEP 3
:
.
a
Unfold Side Arms at 120 degree locations.
b. Place the Ceiling Canopy onto Outlet Box aligning 2
holes in the Ceiling Canopy with 2 Mounting screws
threaded on the Crossbar and secure it against wall with
Mounting Balls
.
STEP 4
:
a Thread the beaded end of the Stem Assembly into the
Coupling underside of the Socket Cluster. Hand tighten until
snug.
.
STEP 5
:
a Locate the following components over the end of the Stem
Assembly in turn:
Flat Washer, Rubber Washer, Shade, Rubber Washer and
Flat Washer.
b. Thread the Hex Nut onto the end of the Stem Assembly to
secure the above parts. Tighten until snug.
c. Locate the Cap over the end of the Stem Assembly and
secure by threading the Finial onto the Stem. Hand tighten
until snug.
.
Outlet
Box
Side Arm
Coupling
STEP 6 :
a
Install correct bulbs referring to fixture markings and or labels for maximum wattage
.
/
.
.
.
.
Your installation is completed now
Restore electricity
Retain this sheet for future reference
Rubber Washer
Rubber Washer
Hex Nut
Finial