Quoizel ARH1717C Aldrich - Manual (Page 3)

Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
3of5
Assembly Instruction Sheet #IS-ARH1717C
For Style ARH1717C
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
, .
. .
2014 QuoizelInc. May 2014
Figure 1 Socket
Assembly
Hex Coupling
Stem
STEP 1 Install Stem
-
A. Thread the beaded end of the Stem (F) into the Hex
Coupling in the bottom center of the Socket Assembly (G).
Hand tighten until snug.
STEP 2 Install Diffuser
-
A. Place the (H), and
over the end of the Stem (F) as
shown. Secure by threading the Hex Nut (1/8 IP) (K)
onto the Stem (F). Hand tighten until snug.
Diffuser the Flat Washer (J) the
Rubber Washer (I)
Stem
Shade
Hex Nut (1/8 IP)
Diffuser
Figure 2
Flat Washer
Rubber Washer
STEP 3 Install Bracket
-
A. Place the Cap (L) and the Bracket (M) over the end of
the Stem (F). Secure by threading the
(N) onto the Stem (F). Hand tighten until snug. Finial with Nipple
Stem
Finial with Nipple
Cap
Figure 3
Bracket