Quoizel TF1400SVB Tiffany - Manual (Page 4)

Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
4of5
Assembly Instruction Sheet #IS-TF1400SVB
For Style TF1400SVB
STEP 5 Attach Ceiling Canopy
-
A. Position the Ceiling Canopy (E) to the ceiling by
passing the Nipple (B) through the center hole.Thread
the Finial (F) to the bottom end of the Nipple (B). Snug
down assembly until the Ceiling Canopy (E) is flush
against the ceiling.
* Be sure that there are no trapped or pinched wires
along the edge of the Ceiling Canopy (E).
Figure 6
Crossbar
Finial
Nipple
Ceiling
Canopy
STEP 4 Make Wire Connections
-
A. Use standard wire connectors to make all wire
connections. (Connectors are not included with fixture.)
Strip and prepare wire ends according to instructions
supplied with connectors.
B. Connect White Supply Wire from the Outlet Box to White
Wire from fixture.
C. Connect Black (or Red) Supply Wire from the Outlet Box
to Black Wire from fixture.
D. Connect Ground Wire from the Outlet Box to Ground
Wire from fixture.
E. Twist connectors until wires are tightly joined together.
F. Wrap each connection with approved electrical tape and
carefully stuff all the connected wires into the Outlet Box.
Figure 5
White wire from supply White wire from fixture
Black wire from supply
(or Red)
Black wire from fixture
Ground wire from supply Ground wire from fixture
Figure 4
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
, .
. .
2013 QuoizelInc. July2013