Quoizel RBN2831C Ribbons User Manual
Page 4
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at
4of4
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
,
.
.
.
2014 QuoizelInc.
June2014
STEP 6 - Install Trimming to Fixture
A. Thread the Short Nipple end of Stem (E) into the Fixture
Body (C), hand tighten until snug.
C. Place the Trimming (F) and Rubber Washer (G) over the
other end of Stem (E). Secure by threading Lock Ball
(H) onto the Stem (E). Hand tighten until snug.
Your fixture is now assembled and ready to use.
Enjoy!
B. Peel off Protective Films on Trimmings (F).
Note: Gloves are required to avoid leaving fingerprints
or scratches on Trimmings (F).
Figure 7
STEP 5 - Install Bulb
A. This fixture uses Frosted G9 Xenon Bulbs. Maximum 40
watts.
B. Insert bulb and seat properly into place.
Do not touch the bulb with bare hands use
a cloth or glove.
IMPORTANT:
Figure 6
Bulb
Stem
Trimming
Rubber Washer
Lock
Ball
STEP 4 - Attach Ceiling Canopy to Crossbar
A. Thread the Mounting Screw (B) into Mounting Hole on
the Crossbar (A) tighten until sung.
,
B. Pass the Gaps on the Ceiling Canopy over the
Mounting Screw (B) and then rotate the Ceiling Canopy.
Do not free your hands until the Ceiling Canopy is
seated onto the Crossbar.
Figure 5
Mounting
Screw
Crossbar
Ceiling
Canopy
Gap
Rubber Washer
CAUTION FOR BULB REPLACING
A. When replace bulb, turn off power and allow lamp to cool. For safety purpose, wear gloves and eye protection.
B. If bulb is scratched or cracked, DO NOT use the lamp to avoid breakage during use or installation.
C. Use only in fixtures rated for lamps wattage and voltage.
D. Prevent the bulb from contacting liquid or combustible materials.
Assembly Instruction Sheet #IS-RBN2831C
For Style RBN2831C
Protective Film