Quoizel RBN1616SG Ribbons User Manual
Page 4
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at
4of4
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
,
.
.
.
2014 QuoizelInc.
June2014
Assembly Instruction Sheet #IS-RBN1616SG
For Style RBN1616SG
STEP 5 - Install Trimming to Fixture
A. Thread the Short Nipple end of Stem (E) into the Fixture
Body (C), hand tighten until snug.
B. Place the Trimming (F) and Rubber Washer (G) over
the other end of Stem (E). Secure by threading Lock
Ball (H) onto the Stem (E). Hand tighten until snug.
Your fixture is now assembled and ready to use.
Enjoy!
Figure 6
STEP 4 - Install Bulb
A. This fixture uses Frosted G9 Xenon Bulbs. Maximum 40
watts.
B. Insert bulb and seat properly into place.
Do not touch the bulb with bare hands use
a cloth or glove.
IMPORTANT:
Figure 5
Bulb
Stem
Trimming
Rubber Washer
Lock Ball
Socket
Fixture Body
Rubber Washer
CAUTION FOR BULB REPLACING
A. When replace bulb, turn off power and allow lamp to cool. For safety purpose, wear gloves and eye protection.
B. If bulb is scratched or cracked, DO NOT use the lamp to avoid breakage during use or installation.
C. Use only in fixtures rated for lamps wattage and voltage.
D. Lamp operate under high pressure generating intense heat. Prevent contact with liquid and combustible
materials.