Quoizel ADS1615DC Adonis - Manual (Page 5)

Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
5of8
Figure 3
STEP 4
- Attach Ceiling Canopy to Outlet Box
A. Thread one Hex Nut (D) onto the end of the Nipple (B).
Adjust the Hex Nut (D) to proper location so that it is
against the inside surface of the Ceiling Canopy(I).
B. Place the Ceiling Canopy (I) and one Check Ring (F)
and one Lock Washer (C) over the Nipple (B) as shown.
Secure by threading the Hex Coupling (E) onto the
Nipple (B). Hand tighten until snug.
Figure 5
STEP 3 Make Wire Connections
-
A. Use standard wire connectors to make all wire
connections. (Connectors are not included with fixture.)
Strip and prepare wire ends according to instructions
supplied with connectors.
B. Connect White Supply Wire from the Outlet Box to White
Wire from fixture.
C. Connect Black (or Red) Supply Wire from the Outlet Box
to Black Wire from fixture.
D. Connect Ground Wire from the Outlet Box to Ground
Wire from fixture.
E. Twist connectors until wires are tightly joined together.
F. Wrap each connection with approved electrical tape and
carefully stuff all the connected wires into the Outlet Box.
Figure 4
White wire from supply White wire from fixture
Black wire from supply
(or Red)
Black wire from fixture
Ground wire from supply Ground wire from fixture
Outlet Box
Nipple
Hex Coupling
Ceiling Canopy
Assembly Instruction Sheet #IS-ADS1615DC
For Style ADS1615DC
Check Ring
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
, .
. .
Lock Washer
2012 QuoizelInc. May2012
Hex Nut