Quoizel UPPS1510WT Uptown Penn Station - Manual (Page 6)

Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
2014 QuoizelInc.
6of7
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
, .
. .
Assembly Instruction Sheet #IS-UPPS1510WT
For Style UPPS1510WT
May2014
STEP 9
- Make Wire Connections
A. Un-thread the Canopy Lock Ring (G) and slide Canopy Lock
Ring (G) and Ceiling Canopy (E) down the Fixture Chain.
B. Push all slack fixture wire through Canopy Chain Loop into
Outlet Box. Trim excess fixture wire leaving a minimum of 6
inch. Hanging out of the Outlet Box.
C. Use standard wire connectors to make all wire connections.
(Connectors are not included with fixture.) Strip and prepare
wire ends according to instructions supplied with connectors.
D. Connect White Supply Wire from the Outlet Box to Ribbed
side Wire from fixture.
E. Connect Black (or Red) Supply Wire from the Outlet Box to
Smooth side Wire from fixture.
F. Connect Ground Wire from the Outlet Box to Ground Wire
from fixture.
G. Twist connectors until wires are tightly joined together.
H. Wrap each connection with approved electrical tape and
carefully stuff all the connected wires into the Outlet Box.
G. Re-attach the Ceiling Canopy (E) as shown in Step 6.
White wire from supply Ribbed side wire from fixture
Black wire from supply
(or Red)
Smooth side wire from fixture
Ground wire from supply Ground wire from fixture
Figure 10
Canopy Chain
Loop
Fixture Chain
Supply Wire and
Ground Wire
Supply Wire
and Ground
Wire from
Outlet Box
Ceiling
Canopy
Canopy Lock Ring
STEP 10 Assemble Side Arm to Socket
Assembly
-
A. Line up the Mounting Hole on the Socket Assembly (M)
and the Hole on the Side Arm (N), secure by thread the
Lock Ball (L) into the Mounting Hole on the Socket
Assembly (M). Hand tighten until sung.
Socket
Assembly
Side Arm
Lock Ball
Figure 11
Figure 9