Quoizel REM345C Remi - Manual (Page 3)

Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
3of5
Assembly Instruction Sheet #IS-REM345C
For Style REM345C
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
, .
. .
Figure 2
Crossbar
Mounting Screw
Lock Washer
Hex Nut
Ceiling
Canopy
STEP 2
- Attach Mounting Screws, Lock
Washers and Hex Nuts to Crossbar
A. Line up a set of holes on the Crossbar (A) and Holes on
the Ceiling Canopy on the top of Fixture Body (F).
B. Thread Mounting Screws (B) into the holes on the
Crossbar (A), pass Lock Washers (C) and thread Hex Nut
(D) onto the Mounting Screws (B). Hand tighten until
snug.
STEP 3
- Attach Crossbar to Outlet Box
A. Attach the Crossbar (A) to Outlet Box and secure by
threading Outlet Box Screws (not supplied) into the
Mounting Holes on the Outlet Box. Tighten until snug.
Crossbar
Outlet
Box
Outlet Box
Screw
Mounting
Hole
Figure 3
2013 QuoizelInc. November2013
Figure 1
Screw
Fixture
Body
Strain Relief
Wire
STEP 1 Snug Screw
-
A. Loosen set Screw on both nipples where the Wire goes
into the canopy.
B. Pull Wire to desired length. Tighten both set Screws to
keep fixture at desired height. place the
down toward canopy. Strain Relief