Quoizel GE1507SE Genova - Manual (Page 2)

STEP 1 :
. a Determine the Rods to be assembled according to your
desired hanging height.
b. Pass the Supply Wires with Ground Wire through the
chosen Rods and then thread Rods and Socket Assembly
together as shown. Tighten until snug. 6” Rod
12” Rod
12” Rod
6” Rod
Supply Wires with
Ground Wire
Socket Assembly
STEP 2 :
.
.
a Pass the Supply Wir es with Ground Wir e through the
Swivel and Ceiling Canopy.
b Thread the Swivel onto the top end of the Upper Rod and
hand tighten until snug.
Swivel
Ceiling Canopy
Supply Wire with
Ground Wire
Upper Rod
STEP 3:
a Screw the Mounting Screws into the Crossbar place the
Lock Washers over the Mounting Scr ews and thread the
Hex Nuts onto the Mounting Screws as shown
Secur e
the position of the Mounting Screws by tightening the Hex
Nuts against the Crossbar
b Secure the Crossbar to the Outlet Box with Outlet Box
Screws
. ,
.
.
.
.
Outlet Box
Crossbar
Mounting Screw
Hex Nut
Outlet Box Screw
Lock Washer
STEP 4 :
* ( ) .
.
.
( )
. ( )
( ) .
.
.
Use Wire Connectors not supplied to connect the wires
a Connect the House Ground Wire to the Fixtur e Ground
Wire.
b Connect the House White Wire to the Fixture Supply Wire
White or Ribbed Side .
c Connect the House Black or Red Wire to the Fixtur e
Supply Wire Black or Smooth Side
d Wrap each connection with approved electrical tape and
carefully stuff all of the connected wires into the Outlet
Box
WHITE WIRE
BLACK OR RED WIRE ( )
FROM HOUSE
GROUND WIRE GROUND WIRE
FROM HOUSE FROM FIXTURE
WHITE OR RIBBED
FROM FIXTURE FROM HOUSE
FROM FIXTURE
BLACK OR SMOOTH
2 OF 3
INSTALLATION INSTRUCTIONS STYLE NUMBER GE150 7SE :