Quoizel FE1506WT Ferndale - Manual (Page 3)

Assembly Instruction Sheet #IS-FE1506WT
For Style FE1506WT
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
, .
. .
6” Rod
12” Rod
12” Rod
6” Rod
Socket
Assembly
Supply Wire and
Ground Wire
STEP 1 Assemble Rods -
A. Determine the Rods (G/H) to be assembled to the Socket
Assembly (I) according to your hanging height.
B. Pass Supply Wires and Ground Wire through the chosen
Rods (G/H) and then thread the chosen Rods (G/H) to the
Socket Assembly (I). Hand tighten until snug.
Figure 1
STEP 2 - Attach Ceiling Canopy with Loop to
Rod
A. Pass Supply Wire and Ground Wire through the Loop and
the Ceiling Canopy. Thread the Loop underside of the
Ceiling Canopy onto the Upper Rod and hand tighten until
snug.
Upper Loop
Supply Wire and
Ground Wire
Figure 2
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
3of5
October2012
Ceiling Canopy
Figure 3
Crossbar
Mounting
Screw
Lock Washer
Hex Nut
Ceiling Canopy
STEP 3 - Attach Mounting Screws, Lock
Washers and Hex Nuts to Crossbar
A. Line up a set of holes on the Crossbar (A) and Holes on
the Ceiling Canopy (F).
B. Thread Mounting Screws (B) into the holes on the
Crossbar (A), pass Lock Washers (C) and thread Hex
Nut (D) onto the Mounting Screws (B). Hand tighten
until snug.
2012 QuoizelInc.
Loop