Quoizel VLA2820C Valla - Manual (Page 4)

Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
4of4
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
, .
. .
2014 QuoizelInc. August2014
Assembly Instruction Sheet #IS-VLA2820C
For Style VLA2820C
STEP 6 Install Trims to Fixture
-
Your fixture is now assembled and ready to use.
Enjoy!
A. Line up the Hole on Trim G with a hole on the
Fixture Body (C) and secure with Screw (F). Line
up the adjacent hole in Fixture Body (C) with
Trim H and secure with Screw (F), too.
B. Alternate Trim G and Trim H for each hole in the
Fixture Body (C).
Figure 7
STEP 5
- Install Bulb
A. This fixture uses G9 Xenon Clear Bulbs (D). Maximum
40 watts.
B. Insert bulb and seat properly into place.
Do not touch the bulb with bare hands use
a cloth or glove.
IMPORTANT:
Figure 6
Bulb
Socket
Trim G
Trim H
Fixture Body
Screw
STEP 4
- Attach Ceiling Canopy to Crossbar
A. Thread Mounting Screws (B) into Mounting Holes on the
Crossbar (A). Leave proper length of Mounting Screws
(B) for Ceiling Canopy installation.
B. Pass the Gaps on the Ceiling Canopy over the
Mounting Screw (B) and then rotate the Ceiling Canopy.
Do not free your hands until the Ceiling Canopy is
seated onto the Mounting Screws (B).
Figure 5
Mounting
Screw
Crossbar
Ceiling
Canopy
Gap
CAUTION FOR BULB REPLACING
A. When replace bulb, turn off power and allow lamp to cool. For safety purpose, wear gloves and eye protection.
B. If bulb is scratched or cracked, DO NOT use the lamp to avoid breakage during use or installation.
C. Use only in fixtures rated for lamps wattage and voltage.
D. Prevent the bulb from contacting liquid or combustible materials.