Quoizel UPFT1820IS Uptown Fulton - Manual (Page 4)

Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
2011 QuoizelInc.
4of6
Figure 4
STEP 3 Assemble Ceiling Canopy to Upper Rod
-
A. Pass Supply Wires and Ground Wire through the Swivel,
Ceiling Canopy, Lock Washer and Hex Nuts.
B. Screw the Swivels into the top end of the Upper Rod. Please
be sure the directions of two Swivels are the same before
hand tighten until snug. This allows the lamp to adjust
angles after assembly. (Refer to Figure 3)
C. Pass the Ceiling Canopy and Big Lock Washers over the
top end of the Swivels. Secure by threading Hex Nuts onto
Swivels. Tighten until snug.
,
Supply Wire and
Ground Wire
Figure 6
STEP 5 Attach Nipple to Crossbar
-
A. Thread one Hex Nut (D) onto the top end of the Nipple
(B).
B. Place one Lock Washer (C) over the top end of the
Nipple (B) and then thread the Nipple (B) into the center
lock hole of the Crossbar (A).
C. Using pliers, thread the hex Nut (D) against the
Crossbar (A) and hand tighten until snug.
Nipple
Crossbar
Lock Washer
Hex Nut
STEP 4
- Attach Crossbar to Outlet Box
A. Secure the Crossbar (A) to the outlet box with outlet
box screws (not supplied). Tighten until snug.
Outlet Box
Screw (not
Supplied)
Figure 5
Crossbar
Outlet Box
Mounting
Hole
Upper Rod
Hex Nut
Lock
Washer
Ceiling
Canopy
Swivel
Assembly Instruction Sheet #IS-UPFT1820IS
For Style UPFT1820IS
November2011
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
, .
. .
Rotate
90 Degree
Front View Side View
Figure 3