Quoizel UPBY5005IS Uptown Bowery - Manual (Page 8)

Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
8of8
G9 Bulb
Socket
Figure 13
STEP 11 - Assemble Shade and Diffuser
A. Place the Diffuser (S) and the Steel Collar (O) over the
Socket as shown. Secure by threading the Socket
Collar (N) onto the Socket. Hand tighten until snug.
B. Place the Shade onto the Diffuser . (P) (Q)
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
, .
. .
Shade
Figure 12
Socket Collar
Steel Collar
Diffuser
Socket
Bulb Shield
CAUTION FOR BULB REPLACING
A. When replace bulb, turn off power and allow lamp to cool. For safety purpose, wear gloves and eye protection.
B. If bulb is scratched or cracked, DO NOT use the lamp to avoid breakage during use or installation.
C. Use only in fixtures rated for lamps wattage and voltage.
D. Lamp operate under high pressure generating intense heat. Prevent contact with liquid and combustible
materials.
2013 QuoizelInc. June2013
STEP 12 - Install Bulb and Bulb Shield
A. This fixture uses Frosted G9 Halogen Bulbs (supplied).
Maximum 75 watts.
B. Insert bulb and seat properly into place.
C. Screw Bulb Shield (I) onto the Socket and hand tighten
until snug.
Do not touch the bulb with bare hands use a
cloth or glove.
Your fixture is now assembled and ready to use. Enjoy!
IMPORTANT:
Assembly Instruction Sheet #IS-UPBY5005IS
For Style UPBY5005IS