Quoizel TCA5004VP Tricia - Manual (Page 2)

WARNING:
CAUTION:
● Before beginning the installation, turn off electricity at the circuit breaker box or the main fuse box by switching
off the circuit breaker or removing the fuse.
● These instructions are provided for your safety. It is very important that they are read completely before the
installation of your fixture. We strongly recommend that a professional electrician install the fixture.
● Disconnect fixture from the power source before replacing the bulb(s), making sure that bulb(s) had sufficient
time to cool down. DO NOT subject the lamp to any shock while lit as shattering of lamp may result.
WARNINGS AND CAUTIONS
STYLE NUMBER: TCA5004VP
INSTALLATION INSTRUCTIONS
● Before beginning installation of product, make sure all parts are present. Compare parts with package contents
list and diagram above. If any part is missing or damaged, do not attempt to assemble, install or operate the
product. Contact customer service for replacement part.
● Estimated Assembly Time: 30 - 45 minutes
● Tool Required for Assembly (not included): Flathead screwdriver, Phillips screwdriver, Pliers, Electrical tape,
Wire cutter, Safety glasses and (4) 60W B10 candelabra base bulbs
● Helpful Tools (not included): Wire strippers.
.
PREPARATION
STEP 1:
a. Thread the Fixture Loop onto the nipple on the top
center of the Fixture Assembly. Hand-tighten until
snug.
Fixture Loop
Fixture
Assembly
STEP 2:
a. Secure the Crossbar onto the Outlet Box with Outlet
Box Screws. Tighten until snug. Outlet Box
Crossbar
Outlet Box
Screw
2 OF 6