Quoizel TY2821AN Taylor - Manual (Page 2)

PREPARATION
● Before beginning installation of product, make sure all parts are present. Compare parts with package contents
list and diagram above. If any part is missing or damaged, do not attempt to assemble, install or operate the
product. Contact customer service for replacement part.
● Estimated Assembly Time: 30 - 45 minutes
● Tool Required for Assembly (not included): Flathead screwdriver, Phillips screwdriver, Pliers, Electrical tape,
Wire cutter, Safety glasses and (4) 100W Type-A medium base bulbs
● Helpful Tools (not included): Wire strippers.
.
STYLE NUMBER: TY2821AN, TY2821WT
INSTALLATION INSTRUCTIONS
STEP 1:
a. (Refer to DETAIL A) Place the hole on the top end of the
Side Arm over the Pipe at the side of the Center
Column. Thread the Finial A onto the end of the Pipe to
secure the Side Arm.
b. (Refer to DETAIL B) Attach the Connectors on the Ring
to the bottom of the Side Arms. Line up mounting holes
on the Connectors and holes on the Side Arms. Using
screwdriver, thread Lock Screws into the mounting
holes on the Connectors to secure them together.
Hand-tighten until snug.
Finial A
2 OF 6
Ring
Center Column
Finial A
Side Arm
Side Arm
Lock Screw
Lock Screw
Side Arm
Ring
DETAIL A
DETAIL B
Pipe
Connector
Connector