Quoizel PCCS2816C Platinum Collection Cascade - Manual (Page 2)

2of3
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
2014 QuoizelInc. April2014
Figure 6
STEP 5 - Wire Connections
A. Use standard wire connectors (not included) to make all wire
connections. (Connectors are not included with fixture.) Strip and
prepare wire ends according to instructions supplied with
connectors.
B. Connect White Supply Wire from the Outlet Box to Ribbed side Wire
from fixture.
C. Connect Black (or Red) Supply Wire from the Outlet Box to Smooth
side Wire from fixture.
D. Connect Ground Wire from the Outlet Box to Ground Wire from
fixture.
E. Twist connectors until wires are tightly joined together.
F. Wrap each connection with approved electrical tape and carefully
stuff all the connected wires into the Outlet Box.
White wire
from supply
Ribbed side wire
from fixture
Black wire from
supply (or Red) Smooth side wire
from fixture
Ground wire
from supply
Ground wire
from fixture
Figure 5
STEP 8 - Install Bulb
A. This fixture uses standard bulb with
medium base. Maximum 60 watts.
B. Insert bulb and screw snugly into place.
Your fixture is now assembled and
ready to use. Enjoy!
Figure 8
Bulb
BB
AA
STEP 6 Attach Ceiling Canopy to
Mounting Screw
-
A. Place the Ceiling Canopy (H) over the
Mounting Screws and secure with
Lock Balls (BB). Hand tighten until
snug.
STEP 4 Install Crossbar -
. .
A. Attach the Crossbar Assembly (AA) to the Outlet Box with the head
of the Green Ground Screw facing you. Secure it with Outlet Box
Screws (not included)
Tighten until snug
STEP 7 - Attach Crystal Pendants
A. Attach Strings D (D) to the holes on the Loop H as
shown.
B. Insert the String C (C) to the bottom center of the Socket Assembly
(K). Insert the Strings B (B) to the holes on the locations B on the
bottom center of the Socket Assembly (K). Insert the Strings A (A) to
the hole on the locations A on the bottom center of the Socket
Assembly (K).
C. Insert the Diffuser (L) inside of the Shade (M) and attach to the Tabs
in the bottom edge of the Shade (M).
Assembly ( )
Outlet Box
AA
Outlet Box Screw
(not included)
Green Ground Screw
A B
B
B
B
A
A
A
A
A
A
A
D
A
B
C
H
H
K
L
M
Figure 4
Mounting
Screw
C
Tab
STRINGS DISTRIBUTION
Figure 7
C B A