Quoizel MC842CRC Laguna - Manual (Page 3)

INSTALLATION INSTRUCTIONS
3 OF 4
STYLE NUMBER MC842CRC :
WHITE OR RIBBED
BLACK OR RED WIRE ( )
FROM HOUSE
GROUND WIRE GROUND WIRE
FROM HOUSE FROM FIXTURE
WHITE OR RIBBED
FROM FIXTURE FROM HOUSE
FROM FIXTURE
BLACK OR SMOOTH
STEP 4 :
* ( )
.
.
. ( )
( )
. ( )
( ).
.
.
Use Wire Connectors not supplied to connect the
wires
a Connect the House Ground Wire to the Fixture Ground
Wire.
b Connect the House White or Ribbed Wire to the
Fixture Supply Wire White or Ribbed Side .
c Connect the House Black or Red Wire to the Fixture
Supply Wire Black or Smooth Side
d Wrap each connection with approved electrical tape and
carefully stuff all of the connected wires into the Outlet
Box
Mounting
Screw
Ceiling
Canopy
STEP 5 :
.
a Place the Ceiling Canopy onto Outlet Box aligning 2
holes in the Ceiling Canopy with 2 Mounting screws
threaded on the Crossbar and secure it against wall
with Mounting Balls
.
STEP 6 :
a. Thread the beaded end of the Stem into the Hex Coupling
underside of the Socket Cluster. Hand tighten until snug.
Outlet Box
Mounting Ball
Socket
Cluster
Hex Coupling
Stem
STEP 7 :
a. Place the Acryl Panel over the end of the Stem, attach onto
the Tabs in the bottom of the Shade Assembly. Place the
Rubber Washer over the end of the Stem and secure with
the Finial. Hand tighten until snug.
Stem
Acryl Panel
Tab
Shade Assembly
Finial
Rubber Washer