Quoizel KD5009MM Kendra - Manual (Page 2)

INSTALLATION INSTRUCTIONS
2 OF 5
STEP 1 :
a Unfold Support Arms to proper locations. Match
the Mounting Holes on Support Arms onto the holes
on the side of the Fixture Body.
b. Thread Lock Screws inside of Mounting Holes to
secure Support Arms as shown.
.
STEP 2 :
a Thread one end of the Nipple into the Hex Coupling
in the center of the Fixture Body. Hand tighten until
snug.
b. Place the Cover and the Support Part over the top
end of the Nipple. Secure them by threading
Fixture Loop onto the Nipple and tighten until snug.
.
STYLE NUMBER KD5009MM :
Fixture Body
Lock Screw
Support Arm
Fixture Loop
Support Part
Cover
Nipple
Hex Coupling
Fixture Body
Mounting Hole
STEP 3 :
a Thread the Finial onto the nipple on the bottom
center of the Lower Junction Box Hand tighten
until snug
.
.
.
Lower Junction Box
Finial