Quoizel KD2824MM Kendra - Manual (Page 5)

5 OF 5
Nipple
Lock Washer
Canopy Chain Loop
Ceiling Canopy
Fixture Chain
Canopy Lock Ring
Hex Nut
Fixture Loop
STEP 10 :
a Adjust the Fixture Chain to your desired length by
removing the links if needed
Please note that depends on chain material
thickness you might be required to use chain
pliers to spread links open
b Pull the supply wires through the Fixture Chain
alternating links And then pull the wires through
the following components in turn
Canopy Lock Ring Ceiling Canopy Canopy
Chain Loop, Lock Washer and Nipple
c Place Lock Washer over the end of the Nipple and
thread the Canopy Chain Loop onto the end of the
Nipple
d Using plier thread the Hex Nut against the
Canopy Chain Loop and tighten until snug
e Attach one end of the Fixture Chain onto the
Fixture Loop and attach the another end of the
chain onto the Canopy Chain Loop
f Refer to Step 11 Wire Connections to connect
wires
g Push the Ceiling Canopy upward over the Outlet
Box
h Thread the Canopy Lock Ring onto the Canopy
Chain Loop and tighten until snug to secure the
Ceiling Canopy
.
.
*
,
.
.
.
:
, ,
, .
.
.
. ,
.
.
.
. -
.
.
.
.
.
STEP 11 :
* ( )
.
.
.
( )
. ( )
( ).
.
.
Use Wire Connectors not supplied to connect
the wires
a Connect the House Ground Wire to the Fixture
Ground Wire.
b Connect the House White Wire to the Fixture
Supply Wire White or Ribbed Side .
c Connect the House Black or Red Wire to the
Fixture Supply Wire Black or Smooth Side
d Wrap each connection with approved electrical
tape and carefully stuff all of the connected wires
into the Outlet Box
WHITE WIRE
BLACK OR RED WIRE ( )
FROM HOUSE
GROUND WIRE GROUND WIRE
FROM HOUSE FROM FIXTURE
WHITE OR RIBBED
FROM FIXTURE FROM HOUSE
FROM FIXTURE
BLACK OR SMOOTH
STEP 12
.
:
a Install correct Bulbs referring to fixture markings and/or labels for maximum wattage.
Your installation is completed now. Restore electricity. Retain this sheet for future reference.
STYLE NUMBER KD2824MM : INSTALLATION INSTRUCTIONS