Quoizel JS1820BN Josslyn - Manual (Page 3)

INSTALLATION INSTRUCTIONS
3 OF 3
STYLE NUMBER JS1820BN :
WHITE OR RIBBED
BLACK OR RED WIRE ( )
FROM HOUSE
GROUND WIRE GROUND WIRE
FROM HOUSE FROM FIXTURE
WHITE OR RIBBED
FROM FIXTURE FROM HOUSE
FROM FIXTURE
BLACK OR SMOOTH
STEP 4 :
* ( )
.
.
. ( )
( )
. ( )
( ).
.
.
Use Wire Connectors not supplied to connect the
wires
a Connect the House Ground Wire to the Fixture Ground
Wire.
b Connect the House White or Ribbed Wire to the
Fixture Supply Wire White or Ribbed Side .
c Connect the House Black or Red Wire to the Fixture
Supply Wire Black or Smooth Side
d Wrap each connection with approved electrical tape and
carefully stuff all of the connected wires into the Outlet
Box
STEP 5:
a. Pass the holes on the Ceiling Canopy over the Mounting
Screws and secure with the Mounting Balls. Hand tighten
until snug.
STEP 6:
a. Screw the beaded end of the Center Stem into the Hex
Coupling underside of the Socket Cluster inside of the
Shade Assembly. Hand tighten until snug.
Mounting Ball
Mounting Screw
Ceiling
Canopy
Hex Coupling
Socket Cluster
Shade Assembly
Center Stem
Tab Center
Stem
STEP 7 :
a Place the Diffuser over the end of the Center Stem, attach
onto the Tabs in the bottom of the Shade Assembly.
b. Pass the Plastic Washer and the Flat Washer over the end
of the Center Stem and secure with the Hex Nut (1/8 IP).
Hand tighten until snug.
c. Thread the Finial onto the end of the Center Stem and hand
tighten until snug.
.
Shade Assembly
Finial
Flat Washer
Plastic Washer
Hex Nut (1/8 IP)
Diffuser
STEP 8 :
a Install correct bulbs referring to fixture markings
and or labels for maximum wattage
Your installation is completed now Restore electricity
Retain this sheet for future reference
.
/ .
. .
.