Quoizel IE5005BN Ibsen - Manual (Page 2)

ASSEMBLY INSTRUCTIONS
2 OF 3
STEP 1 :
a Unfold the Support Arms to proper locations.
b. Locate Steel Ring from the bottom of the Fixture
Assembly and match the holes on the Ring onto the
Mounting Holes on the Support Arms.
c. Using screwdriver, thread Lock Screws into the
Mounting Holes and tighten until snug to secure the
Steel Ring onto Support Arms.
.
STEP 2:
Thread Fixture Loop onto the Nipple on the top
center of the Fixture Assembly. Hand tighten until
snug.
a.
STEP 3:
Secure the Crossbar onto the Outlet Box with
Outlet Box Screws Tighten until snug . .
a.
STEP 4:
*
. .
.
.
. ,
.
.
.
Plier is required on this step
Thread one Hex Nut onto top end of the Nipple
Place one Lock Washer over the top end of the
Nipple and then thread the Nipple into the
center lock hole of the Crossbar
Us plier thread the Hex Nut against the
rossbar and hand tighten until snug
Thread another Hex Nut onto the bottom end of
the Nipple
.
a
b
c ing
c
d
STYLE NUMBER IE5005BN :
Support Arm
Mounting Hole
Lock Screw
Steel Ring
Fixture Loop
Fixture Assembly
Crossbar
Outlet Box
Outlet Box Screw
Crossbar
Lock Washer
Hex Nut
Hex Nut
Nipple