Quoizel FE5004WT Ferndale - Manual (Page 8)

Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
8of8
Figure 10
Socket
Shade
Socket
Collar
STEP 9 - Attach Shade to Socket
A. Place the Shade (N) and Steel Collar (J) over the Socket
as shown. Thread the Socket Collar (I) onto the Socket to
secure the Shade (N). Hand tighten until snug.
Figure 11
Assembly Instruction Sheet #IS-FE5004WT
For Style FE5004WT
Steel
Collar
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
, .
. .
Bulb Shield
G9 Bulb
Socket
STEP 10 Install Bulb and Bulb Shield -
A. This fixture uses Frosted G9 Halogen Bulbs. Maximum 100
watts (supplied).
B. Insert bulb and seat properly into place.
C. Screw Bulb Shield (P) onto the Socket and hand tighten until
snug.
Do not touch the bulb with bare hands use a
cloth or glove.
Your fixture is now assembled and ready to use.
Enjoy!
IMPORTANT:
CAUTION FOR BULB REPLACING
A. When replace bulb, turn off power and allow lamp to cool. For safety purpose, wear gloves and eye protection.
B. If bulb is scratched or cracked, DO NOT use the lamp to avoid breakage during use or installation.
C. Use only in fixtures rated for lamps wattage and voltage.
D. Lamp operate under high pressure generating intense heat. Prevent contact with liquid and combustible
materials.
2013 QuoizelInc. April2013