Quoizel DW5015C Downtown - Manual (Page 9)

Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
9of10
Assembly Instruction Sheet #IS-DW5015C
For Style DW5015C
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
, .
. .
2013 QuoizelInc. March2013
STEP 10
- Make Wire Connections
A. Push all slack fixture wire through Canopy Chain Loop
(E) into Outlet Box. Trim excess fixture wire leaving a
minimum of 6 inch. Hanging out of the Outlet Box.
B. Use standard wire connectors to make all wire
connections. (Connectors are not included with fixture.)
Strip and prepare wire ends according to instructions
supplied with connectors.
C. Connect White Supply Wire from the Outlet Box to
Ribbed wire from fixture.
D. Connect Black (or Red) Supply Wire from the Outlet Box
to Smooth wire from fixture.
E. Connect Ground Wire from the Outlet Box to Ground
Wire from fixture.
F. Twist connectors until wires are tightly joined together.
G. Wrap each connection with approved electrical tape and
carefully stuff all the connected wires into the Outlet Box.
H. Re-attach the Ceiling Canopy (F) as shown in Step 5.
Figure 11
White wire from supply
Black wire from supply
(or Red)
Ground wire from supply Ground wire from fixture
Figure 12
Canopy Chain Loop
Ceiling
Canopy
Canopy Lock Ring
Fixture Chain
Supply Wire
and Ground
Wire from
Outlet Box Supply Wire and
Ground Wire
Ceiling
Line
STEP 11
- Attach Shade to Fixture Body
A. Place the Shade (R) and the Steel Collar (Q) over the
Socket as shown. Secure by threading the Socket
Collar (P) onto the Socket. Hand tighten until snug.
Figure 13
Ribbed wire from fixture
Smooth wire from fixture
Socket Collar
Steel Collar
Shade
Socket