Quoizel EME8608C Evermore - Manual (Page 4)

Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
2014 QuoizelInc.
4of4
Assembly Instruction Sheet #IS-EME8608C
For Style EME8608C
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
, .
. .
April2014
Figure 5
STEP 4
- Attach Backplate to Mounting
Screw
A. Place the Backplate over the Mounting Screws (B) and
secure with Mounting Balls (E). Hand tighten until
snug.
Mounting Screw
Mounting Ball
Backplate
Figure 6
STEP 5 Install Bulb
-
A. This fixture uses Clear G4 Xenon Bulbs. Maximum 20
watts.
B. Insert bulb and seat properly into place.
Do not touch the bulb with bare hands
use a cloth or glove.
IMPORTANT:
G4 Bulb
Socket
STEP 6
- Attach Crystal Shade
A. Place the Crystal Shade back onto the Backplate and
secure with Lock Screws. Hand tighten until snug.
Your fixture is now assembled and ready to use.
Enjoy!
Backplate
Figure 7 Lock Screw
Crystal Shade
CAUTION FOR BULB REPLACING
A. When replace bulb, turn off power and allow lamp to cool. For safety purpose, wear gloves and eye protection.
B. If bulb is scratched or cracked, DO NOT use the lamp to avoid breakage during use or installation.
C. Use only in fixtures rated for lamps wattage and voltage.
D. Lamp operate under high pressure generating intense heat. Prevent contact with liquid and combustible
materials.