Quoizel ERN8604IB Erin User Manual
Page 5
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at
5of5
STEP 5 - Attach Shade to Fixture Body
A. Place the Shade (J) and the Steel Collar (I) over the
Socket as shown. By using the Socket Collar Tool (K),
thread the Socket Collar (H) onto the Socket to secure
the Shade (J). Hand tighten until snug.
Figure 6
Socket Collar
Shade
Steel Collar
Socket
Figure 7
Socket
G9 Bulb
STEP 6
Install Bulb
-
A. This fixture uses Frosted G9 Halogen bulbs with G9
base. Maximum 60 watts.
B. Insert bulb and push snugly into place.
C. Thread the Bulb Shield (G) onto the Socket and hand
tighten until snug.
Do not touch the bulb with bare hands
use a cloth or glove.
Your fixture wall lamp is now assembled and ready to
use. Enjoy!
IMPORTANT:
Assembly Instruction Sheet #IS-ERN8604IB
For Style ERN8604IB
Socket Collar Tool
CAUTION FOR BULB REPLACING
A. When replace bulb, turn off power and allow lamp to cool. For safety purpose, wear gloves and eye protection.
B. If bulb is scratched or cracked, DO NOT use the lamp to avoid breakage during use or installation.
C. Use only in fixtures rated for lamps wattage and voltage.
D. Lamp operate under high pressure generating intense heat. Prevent contact with liquid and combustible
materials.
Bulb Shield
2014 QuoizelInc.
January2014
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
,
.
.
.