Quoizel BAR8604C Barrow User Manual
Page 3
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at
2014 QuoizelInc.
3of5
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
,
.
.
.
April2014
Assembly Instruction Sheet #IS-BAR8604C
For Style BAR8604C
Figure 2
STEP 2
Make Wire Connections
-
A. Use standard wire connectors to make all wire
connections. (Connectors are not included with fixture.)
Strip and prepare wire ends according to instructions
supplied with connectors.
B. Connect White Supply Wire from the Outlet Box to White
Wire from fixture.
C. Connect Black (or Red) Supply Wire from the Outlet Box
to Black Wire from fixture.
D. Connect Ground Wire from the Outlet Box to Ground
Wire from fixture.
E. Twist connectors until wires are tightly joined together.
F. Wrap each connection with approved electrical tape and
carefully stuff all the connected wires into the Outlet Box.
Figure 3
White wire from supply
White wire from fixture
Black wire from supply
(or Red)
Black wire from fixture
Ground wire from supply
Ground wire from fixture
STEP 1 - Attach Inner Backplate to Outlet Box
A. Place the Inner Backplate (A) onto the Wall surface and
line up one set of holes onto mounting holes on Outlet Box.
Using a pencil, mark the locations for Wall Anchors (C).
B. Remove the Inner Backplate (A) and drill holes from the
marks on the wall surface and then push the Wall Anchors
(C) into the holes.
C. Position the Inner Backplate (A) back onto the Wall,
secure by threading the Outlet Box Screws (not supplied)
into the mounting holes on the Outlet Box and screw Self-
tapping Screws (D) into the Wall Anchors (C). Tighten until
snug.
Figure 1
Outlet Box
Self-tapping
Screw
Outlet Box
Screw (not
supplied)
Inner
Backplate
Wall Anchor
Wall Surface