Quoizel TU8604BN Tatum - Manual (Page 2)

INSTALLATION INSTRUCTIONS
2 OF 3
STYLE NUMBER: TU8604BN
STEP 1:
a. Line up a set of holes on the Inner Backplate to the
mounting holes on the Outlet Box. With a pencil, point
two Marks on the wall surface from Keyholes.
b. Remove the Inner Backplate. Drill proper holes for Wall
Anchors and Outlet Box Screws.
c. Push the Wall Anchors into the drilled holes on the wall.
Place the Inner Backplate over the Outlet Box and
secure with (2) Outlet Box Screws and (2) Self-tapping
Screws.
Outlet Box
Inner
Backplate
Mark
Outlet Box Screw
STEP 2:
a. Connect the House Ground Wire to the Fixture Ground
Wire.
b. Connect the House White (or Ribbed) Wire to the
Fixture Supply Wire (Black or Smooth Side).
c. Connect the House Black (or Red) Wire to the Fixture
Supply Wire (Black or Smooth Side).
d. Wrap each connection with approved electrical tape
and carefully stuff all of the connected wires into the
Outlet Box.
WHITE OR RIBBED
BLACK (OR RED) WIRE
GROUND WIRE
WHITE OR RIBBED
BLACK OR SMOOTH
GROUND WIRE
FROM HOUSE
FROM HOUSE
FROM HOUSE
FROM FIXTURE
FROM FIXTURE
FROM FIXTURE
Use Wire Connectors (not supplied) to connect the
wires.
STEP 3:
a. Place the Backplate over the Inner Backplate and
secure with Mounting Screws. Hand-tighten until snug
with screwdrivers.
Inner Backplate
Backplate
Self-tapping Screw
Wall Anchor
Keyhole
Mounting Screw