Quoizel NN8602BN Nolan User Manual
Page 5
Figure 7
Bulb Shield
G9 Bulb
Socket
STEP 6
Install Bulb and Bulb Shield
-
A. This fixture uses Frosted G9 Halogen Bulbs. Maximum 60
watts.
B. Insert bulb and seat properly into place.
C. Screw Bulb Shield (G) onto the Socket and hand tighten
until snug.
Do not touch the bulb with bare hands use a
cloth or glove.
Your fixture is now assembled and ready to use. Enjoy!
IMPORTANT:
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at
2013 QuoizelInc.
5of5
STEP 5 - Attach Shade to Socket
A. Place the Shade (K) and the Steel Collar (I) over the
Socket as shown. By using the Socket Collar Tool (L)
threading the Socket Collar (H) onto the Socket. Hand
tighten until snug.
Socket Collar
Shade
Figure 6
Steel Collar
Socket
Assembly Instruction Sheet #IS-NN8602BN
For Style NN8602BN
CAUTION FOR BULB REPLACING
A. When replace bulb, turn off power and allow lamp to cool. For safety purpose, wear gloves and eye protection.
B. If bulb is scratched or cracked, DO NOT use the lamp to avoid breakage during use or installation.
C. Use only in fixtures rated for lamps wattage and voltage.
D. Lamp operate under high pressure generating intense heat. Prevent contact with liquid and combustible
materials.
October2013
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
,
.
.
.
Socket Collar
Tool