Installation instructions, Step 2, Step 4 – Quoizel NL8601BN Nicholas User Manual
Page 2: Step 3, Step 1
INSTALLATION INSTRUCTIONS
2 OF 3
STYLE NUMBER NL8601C, NL8601HO,NL8601BN
:
Crossbar
Lock Washer
Hex Nut
Nipple
STEP 2
:
*
.
.
.
.
.
.
,
.
Pliers is required on this step
a
Thread the Hex Nut onto one end of the Nipple
b
Place the Lock Washer over the hex nut end of the
Nipple and then thread the Nipple into the center lock
hole of the Crossbar
c Using pliers
thread the Hex Nut against the Crossbar
and hand tighten until snug
STEP 4
:
a
Place the Backplate over the Outlet Box as shown. Secure
by threading the Lock Ball onto the Nipple. Hand tighten
until snug.
.
Lock Ball
Backplate
Nipple
Outlet Box
WHITE OR RIBBED
BLACK OR RED WIRE
(
)
FROM HOUSE
GROUND WIRE
GROUND WIRE
FROM HOUSE
FROM FIXTURE
WHITE OR RIBBED
FROM FIXTURE
FROM HOUSE
FROM FIXTURE
BLACK OR SMOOTH
STEP 3
:
*
(
)
.
.
.
(
)
(
)
.
(
)
(
).
.
.
Use Wire Connectors not supplied to connect the
wires
a
Connect the House Ground Wire to the Fixture Ground
Wire.
b
Connect the House White
or Ribbed
Wire to the
Fixture Supply Wire White or Ribbed Side .
c Connect the House Black or Red
Wire to the Fixture
Supply Wire Black or Smooth Side
d Wrap each connection with approved electrical tape and
carefully stuff all of the connected wires into the Outlet
Box
Outlet Box
Crossbar
Outlet Box
Screw
STEP 1
:
a Secure the Crossbar onto the Outlet Box with Outlet Box
Screws
Tighten until snug
.
.
.