Wichita Clutch LK Brake - Manual (Page 14)

B
Air Tube Disc Clutches and Brakes
P-1100-WC 1/12 Wichita Clutch 800-964-3262 35
Wichita Part No. AA B C D E F G H Max. RPM
8-240-701-003-1 5/8-18NF 1/4" NPT .40 1.046 2.250 1.500 2.13 3.297 3500
8-240-705-001-1 1"-14 NF 1/2" NPT .75 1.250 3.188 2.500 3.00 4.438 3500
8-240-708-001-1 1"-14 NF 3/4" NPT .75 1.313 4.688 2.875 3.69 5.440 3500
8-240-710-002-1 1-1/2"-12 NF 1" NPT 1.13 1.937 4.875 3.250 3.44 6.812 2500
8-240-712-001-1 2"-12 NF 1-1/2" NPT 1.13 2.813 5.250 4.250 5.38 8.062 2500
8-240-714-001-3 2" NPT 2" NPT 1.50 3.000 7.062 4.625 7.00 10.062 1000
8-240-716-000-3 2-1/2" NPT 2-1/2" NPT 1.88 3.250 9.375 7.000 7.75 12.625 750
Quick Release Valve
8-263-610-011-1 7/8" – 14 Thread
8-263-610-021-1 1/2" NPT
4-263-605-002-0 Optional Muffler
Quality Material
Body and Cap: High strength aluminum alloy
Stem: Molded nylon
Check Valve: Nylon ball
"O" Ring: Neoprene
The Wichita Springless Quick Release Valve
discharges twice as fast as any other valve
tested in our laboratory and is four to five times
faster than some common makes of valves.
This valve will close and seal with less than 20
lbs. pressure. Most others require 25 to 30 lbs. to
definitely seal. In actual tests, the Wichita Valve
made many hundreds of thousands of
engagements and dis en gage ments before the
slightest leak occurred, or any parts needed re -
place ment. Other valves which were tested
required major re place ment in fewer than 20,000
cycles.
Standard thread arrangement of 1/2" size.
1/2" pipe thread on the tube connection and
choice of 1/2" pipe thread, or stan dard
7/8-14NF thread for flared fitting thread on
inlet connection. (Fits standard No. 10 high-
pressure hose fitting.)
1/2" NPT (for Optional Muffler 4-263-605-002-0)
The Wichita Roto-coupling is a device to
connect, or couple, a non-rotating air, gas,
or fluid line to a rotating shaft.
• Long life, no maintenance.
• Felt seal eliminates bearing con tam i na tion.
• Fast, easy installation.
Roto-couplings
Dimensions: inches