SCANTECH ID (Champtek company) VEGA V-1030 - Manual (Page 9)

9
A reading session begins (lighting and decode processing on) when beam
is activated and stops when beam is deactivated.
Continuous Scanning
When the scanner is turned on a continuous reading session begins
(lighting and decode processing on).
Pulse
A reading session begins when beam is activated and stays on until a
period of inactivity lasting the time specified by the timeout.
After the timeout, the scan engine turns off.
Flashing
Flashing mode allows power up the lighting and decoding are on (no
need to activate the trigger line) and after a period of inactivity lasting
the time specified by the trigger timeout, the scanner starts flashing,
checking for a bar code to be read.
When a bar code is detected, the lighting and decoding automatically
turn on and stay on until another period of inactivity (timeout), after the
timeout the scanner starts flashing again.