SCANTECH ID (Champtek company) VEGA V-1030 - Manual (Page 10)

10
Autostand
This mode allows you to switch from Flashing trigger mode to Level
trigger mode.
Autostand begins in flashing mode: At power up the lighting and
decoding are on (no need to activate the trigger line) and after a period
of inactivity lasting the time specified by the trigger timeout, the scanner
starts flashing.
To switch to Level trigger mode activate the trigger line (press the trigger).
When in Level trigger mode, after a period of inactivity lasting the time
specified by the trigger timeout, the scanner switches back to flashing
mode.
Toggle
This mode allows lighting and decoding toggle when the trigger line is
activated.
First trigger activation = lighting and decoding on,
Second trigger activation = lighting and decoding off.
Presentation
This mode allows power up lighting and decoding are on. After a period
of inactivity lasting the time specified by the trigger timeout, the lighting
turns off or is dimmed. When a new bar code is presented the lighting
and decoding restart and stay on until another period inactivity.