Valco Baby Matrix - Manual (Page 5)

SECURING YOUR BRAkES
FIGURE J
26. With your foot, press down on the centre
of the brake lever to simultaneously
engage the brake in both wheels.
27. To release, simply lift the lever with your
foot. IMPORTANT: Always test that the
brakes are fully engaged by pushing the
stroller forward and backward.
YOUR RECLINING SYSTEM
FIGURE K
28. TO RECLINE: While squeezing the centre
release mechanism in a pincer action,
ease the seat down to the desired
position.
29. TO INCLINE: Place your hand at the
centre of the rear of the seat. Pull the
incline strap while gently pushing on the
rear of the seat until the desired position
has been reached.
TO SECURE YOUR CHILd IN
THE HARNESS
FIGURE L
Your child must ALWAYS be harnessed while
in the stroller.
30. Overlap the buckles so that they fit
together to form one complete buckle.
31. Insert the completed buckle into the
buckle Housing until it engages securely
in place.
32. Carefully adjust the harness straps to
snugly fit your child by adjusting the
Sliders located on all Shoulder Straps,
Waist Straps and the Crotch Strap.
IMPORTANT: The harness should be
snugly fitted to the baby’s body, tight
enough so that the baby cannot wriggle
itself free of the straps but loose
enough so as not to cause the baby any
discomfort.
J
K
L
PRESS
DOWN
HOLD
DOWN
PUSH
RELEASE
HOLD
CLICK
26
28
29
33b 33a 34
30
31