Unitec ReachFree ID for Wash Select II - Manual (Page 15)

R E A C H F R E E I D
Document Number: RFID1002 11
Document Name: Unitec RFID Field Retrofit Installation Guide for WSII
Figure 8. Expansion/RFID Board Connections for Wash Select II
6 RFID Tags
Figure 9. Sample RFID Tag
The ReachFree ID vehicle tag should be applied to the INSIDE bottom or top corner of the
windshield on the driver’s side, depending on the height of the vehicle, so that the tag is in
approximately the same place on every vehicle. For example, if the vehicle is a taller SVU,
apply the tag to the bottom of the windshield. If the vehicle is a smaller sports car, apply the tag
to the top corner of the windshield. Make sure the windshield is clean before adhering the tag
to the glass.