Cabletron Systems NBR-420 - Manual (Page 51)

Chapter 4: Troubleshooting
Page 4-10 NBR-SERIES Installation Guide
4.3.4 Saved System Messages
Saved System messages are device related startup or boot strap messages,
BOOTP/TFTP host, or startup error messages. The following messages
can be displayed:
To Display Messages
There are two ways to access and display the Saved System messages:
Displayed Messages Comments
Port xxxxxx
Link Established
Displays the link status of ports A, B, C, D, E, or F.
Port xxxxxx
Not Linked
Displays the link status of ports A, B, C, D, E, or F.
Network/Port x
EPIM Inserted
Displays installation status of ports A, B, C, or D.
Network/Port x
EPIM Removed
Displays installation status of ports A, B, C, or D
Bridge Port x
Stand By Indicates Bridge port A, B, C, or D in Stand By
mode.
Bridge Port x
On Line
Indicates Bridge port A, B, C, or D On Line.
No Messages in
Queue x
No Alarm messages.
TFTP Host
xxx.xxx.xxx.xxx TFTP File
xxxxxxxxxxxxxxxx
Last Host Used
xxx.xxx.xxx.xxx Last File Used
xxxxxxxxxxxxxxx
NOTE
Whether you are displaying Static System messages, Alarm
messages, or Saved System messages, the display returns to
the product name display 20 seconds after the last operation of
the DISPLAY button.