Triton DCA 250 User Manual

Page 4

Operation / Warranty

Triton Precision Power Tools guarantees

to the purchaser of this product that if

any part proves to be defective due to

faulty materials or workmanship within

12 MONTHS from the date of original

purchase, Triton will repair, or at its

discretion replace, the faulty part free of

charge.
This guarantee does not apply to

commercial use nor does it extend to

normal wear and tear or damage as a

result of accident, abuse or misuse.
* Register online within 30 days.
Terms & conditions apply.
This does not affect your statutory rights

To register your guarantee visit our web site at

www.tritontools.com* and enter your details.
Your details will be included on our mailing list

(unless indicated otherwise) for information on

future releases. Details provided will not

be made available to any third party.

PURCHASE RECORD

Date of Purchase: ___ / ___ / ____
Model: DCA250

Retain your receipt as proof of purchase

WARRANTY

OPERATION

When in the crosscut mode, slide the plug

to either end of the slot to avoid accidentally

cutting it.
Empty your vacuum cleaner and make sure

the filter and/or bags are not clogged, reducing

the suction. We recommend the optional

Triton Dust Collector to prevent the finer

dust particles from potentially reaching your

vacuum cleaner motor.
Tap the bag prior to removing the pouch to

ensure all the dust falls to the base of the bag.
If correctly fitted, the system should collect

close to 95% of the dust. A small amount of

dust will be evident in the working area.

Planing Cuts
When making planing cuts on the Workcentre

(using the side of the blade), you will find that

a lot of dust escapes. For frequent planing

cuts, we recommend you make up a baffle.

For occasional planing cuts, tape stiff

cardboard to the side of the guard, and bend

it in at the front, to achieve a similar result.

WARNINGS
Ensure the saw sleeve remains correctly fitted

to the saw motor, and check it periodically,

especially after saw blade height adjustments.
Do not risk overloading your fuses, and the

Workcentre switch by connecting the saw and

vacuum cleaner to the same power circuit for

simultaneous switching. The combined start-

up amperage is excessive and could result

in fusion and possibly fire. Switch them on

separately.

INHOUD

Hartelijk dank voor de aanschaf van dit Triton-gereedschap. Deze instructies geven informatie voor een

veilige en doeltreffende bediening van dit product.

Lees deze handleiding zodat u de voordelen van het unieke design van dit product ten volle kunt benutten.

Houd deze handleiding bij de hand en zorg ervoor dat alle gebruikers van dit gereedschap de handleiding

hebben gelezen en volledig hebben begrepen.

Inhoud / Symbolen / Onderdelen Lijst

ONDERDELEN LIJST

Symbolen

Onderdelen lijst

Veiligheid

Montage

Werking 11
Garantie

SYMBOLEN

Draag ten allen tijden oog-, oor- en

mondbescherming.

Instructie waarschuwing.

Gebruik het product niet voordat u alle

instructies gelezen hebt en begrijpt

A. Stof (1)
B. Afneembare zak (1)
C. Vacuümslang (1)
D. Bajonet en sluitverbindingen (2)
E. Skid (schuifvoet) (1)
F. V-vormige beugels (4)
G. Platte beugel (1)
H. Bouten & moeren (2)