Trebor Q-Series Di Water Heater - Manual (Page 26)

PAGE 26 Q-SERIES DI HEATER OPERATION / MAINTENANCE MANUAL
Disengage the inlet fitting by sliding the bottom of heater off shelf.
Lower the heater to disengage top fitting from manifold.
Use an absorbent cloth to remove any liquid from the leak sensor
probe and leak containment well.
Install replacement heater module into cabinet in reverse order from
above. Note: Carefully align the fluid fittings because they can easily
be cross-threaded.
Figure 8-1
Process T/C
Heater Band Clamps