TERRALUX DRV - Manual (Page 2)

2
TerraLUX D
R
V Product Specification – Subject to change without notice
WWW.TERRALUX.COM
10/01/2014
Performance
TerraLUX
D
R
V
Out
of
fixture
Light
engine
only
–
no
diffuser
Color
Temperature
3000K,
3500K
and
4000K
CRI:
Min
[typical]
80
[83]
Light
Output
[lumens]
@
120V
118
(18W
CFL
eq.)
858
1300
126
(26W
CFL
eq.)
950
1440
132
(32W
CFL
eq.)
1150
1742
142
(42W
CFL
eq.)
1285
1947
Power
[Watts]
118
(18W
CFL
eq.)
13
13
126
(26W
CFL
eq.)
14.5
14.5
132
(32W
CFL
eq.)
17.5
17.5
142
(42W
CFL
eq.)
19.5
19.5
Efficacy
[lm/W]
@
120V
66
100
Notes:
•
Typical Performance @ 25°C. See Relative Light Output vs Temperature and LEDSense® graphs, page 3, for temperature & Power de-rating.
• All specifications subject to tolerance of ± 10%
• Estimates, will be updated with measurements by third party per IESNA-LM79-08
LEDSense ® Operation, Thermal De-rating and Lumen Maintenance
The D
R
V employs TerraLUX’s patented LEDSense ® Thermal Management Technology to
automatically provide maximum light output in various fixtures and operating conditions while
assuring long-term lumen maintenance. LED-Sense
® regularly measures the operating temperature
and ensures compliance with a pre-programmed temperature and drive-current profile. This profile
is based on the LED manufacturer’s LM-80 data report and minimum L70@60,000 hour lumen
maintenance curves. LEDSense
® is always active, and will compensate for variation in thermal
conditions due to heatsinking, ambient air, Engine positioning, or any other variable that affects the
operating temperature. The Thermal De-rating curve below identifies the relative light output that
can be expected under various thermal conditions. The LEDSense
® Power Curve identifies the
reduction in input power over temperature.