Crimestopper Security Products CS-2016FM - Manual (Page 9)

REMOTE ENGINE CONTROL
REMOTE ENGINE STARTING - SUCCESSFUL START
1) Press remote start button on the remote transmitter. System will chirp 3 times for audible confirmation.
(Chirps can be programmed on or off-See installation manual.)
2) Parking lights flash once, then turn on solid, Ignition/Accessory circuits turn on.
3) After a few seconds, Starter Motor engages, Parking lights and Accessory circuits turn off while cranking.
4) Engine Starts and Runs. Parking Lights and Accessory turn back on, Doors Lock.
5) Engine will remain running for programmed run time until reset with Brake pedal. If needed, the engine can
be turned off with remote transmitter.
REMOTE ENGINE STARTING - SUCCESSFUL START DIAGRAM:
AFTER
IGN
3
STARTER
THEN
FLASH 1X
SOLID
SOLID
SEC.
START
PM
IGN
CONFIRM REMOTE
START REQUEST
REMOTE ENGINE STARTING – LCD PAGER-REMOTE:
PM
IGN
(<<<< MOVING <<<<<)
SUCCESFUL START
When requesting a remote start the LCD pager remote
will confirm with an Ignition Icon along with 4 beeps.
Once the vehicle has successfully started the remote will
confirm back with 2 vibrations, a moving vehicle Icon, and
4 beeps.
9