Crown Audio MA-3600VZ - Manual (Page 16)

Operation Manual
Macro-Tech MA-3600VZ Power Amplifier
page 16
6 Specifications
Minimum Guaranteed Power
(see page 18 for complete power specifications) 120VAC, 60 Hz Units 100VAC International
Units
120 VAC International
Units
230VAC International
Units
Power in watts per channel,1 kHz, 0.1% THD
Stereo mode with both channels driven
2 ohms per ch.
4 ohms per ch.
8 ohms per ch. 1800W
1565W
1120W 1460W
1300W
980W
1490W
1300W
985W
1520W
1325W
965W
Bridge-Mono mode
4 ohms
8 ohms 3505W
3140W 2835W
2625W 2980W
2600W 2800W
2515W
Parallel-Mono mode
1 ohm
2 ohms 3555W
3190W 2820W
2585W 2980W
2600W 2910W
2565W
Performance (120V AC units in stereo mode with 8 ohm load)
Frequency Response
(at 1 watt, 20Hz - 20 kHz) see Figure 6.3 ± 0.1 dB
Phase Response
(at 1 watt, 10Hz - 20 kHz) see Figure 6.6 ±10°
Signal to Noise Ratio below full bandwidth power
20 Hz to 20 kHz
A-weighted >100 dB
>105 dB
Total Harmonic Distortion (THD)
at rated power, from 20 Hz to 1 kHz
at rated power, at 20 kHz < 0.05%
< 0.1%
Intermodulation Distortion (IMD)
60 Hz and 7 kHz at 4:1,from 368 milliwatts to full rated output < 0.05%
Damping Factor
10 Hz to 400 Hz See Figure 6.4 >1000
Crosstalk
(below rated power, 20 Hz to 10 kHz) see Figure 6.7
Controlled Slew Rate > 30 volts/microsecond
Input Impedance nominally balanced, nominally unbalanced 20 k ohms, 10 k ohms