Stealth Cam STC-U840IRS1 UNIT-S1-Presets - Manual (Page 27)

WWW.STEALTHCAM.COM
Toll Free 877-269-8490
27
USING
THE
CAMERA
IN
PIR
DETECTION
MODE
• Mount
the
camera
to
the
tree
or
other
sturdy
object
using
either
a
tree
screw
(optional
accessory)
or
supplied
mounting
strap.
• Open
the
front
housing
and
move
the
switch
to
either
one
of
the
Preset
modes
or
Manual
mode.
At
this
point,
you
have
30
seconds
to
make
any
mode
selection
changes
before
camera
is
ready
to
use.
•
If
you
chose
Manual
mode
then
make
sure
your
camera
is
in
the
PIR
mode
and
not
Time
Lapse
(tLS).
If
your
not
sure,
please
follow
the
“Setting
the
Camera’s
Operation
Mode”
above
to
set
the
camera
into
the
proper
mode.
To
Capture
Images,
make
sure
display
reads
CAMERA:
• Once
in
Manual
mode,
if
the
display
does
not
read
CAMERA
then,
Ø
Press
the
[MENU]
button
once.
Ø Press
the
[OK]
button
once.
Ø The
word
CAMERA
will
blink.
Ø Press
the
[UP]
button
ONE
time
to
toggle
to
Camera
mode.
Ø Press
the
[OK]
button
TWO
times.
Ø Press
the
[MENU]
button
once
to
exit.
To
Capture
Videos,
make
sure
display
reads
VIDEO:
•
Once
in
Manual
mode,
if
display
does
not
read
VIDEO
then,
Ø
Press
the
[MENU]
button
once.
Ø Press
the
[OK]
button
once.
Ø The
word
CAMERA
will
blink.