Stealth Cam STC-U840IRS1 UNIT-S1-Presets - Manual (Page 22)

WWW.STEALTHCAM.COM
Toll Free 877-269-8490
22
•
The
Month
digits
will
be
blinking.
• Press
[UP]
or
[DN]
to
increase
or
decrease
the
Month
value
(1
-­‐
12).
• Press
[OK]
to
save
your
selection
and
enter
Day
setting.
•
The
Day
digits
will
be
blinking.
•
Press
[UP]
or
[DN]
to
increase
or
decrease
the
Day
value
(01
–
31).
• Press
[OK]
to
confirm
the
Date
setting
and
enter
Year
setting.
• The
YEAR
digits
will
be
blinking.
•
Press
[UP]
or
[DN]
to
increase
or
decrease
the
Year
value
(01
–
99).
• Once
this
is
all
done,
press
[OK].
•
You’ll
then
see
the
word
-­‐
dEL
-­‐
blinking.
• Press
[MENU]
button
to
exit
the
program
setting
and
back
to
the
status
screen.
Setting
the
Time
Lapse
Mode:
The
Time
Lapse
default
setting
value
is
from
18:00
to
08:00
the
next
day.
When
the
camera
is
set
to
use
the
Time-­‐Lapse
mode
(tLS),
the
program
settings
will
follow
the
Time
Lapse
settings.
Outside
of
the
Time
Lapse
time
frame;
the
camera
will
follow
the
user
defined
PIR
settings.
The
user
can
set
the
program
for
a
pre-­‐determined
time
period
[such
as
18:00
to
08:00].
The
user
then
sets
the
frequency
of
still
images
only
(video
function
not
available
in
Time
Lapse
mode).
The
camera
will
remain
in
Time
Lapse
mode
until
the
user
has
changed
the
program
setting.
•
Switch
the
camera
to
the
Manual
position.
Ø
LCD
screen
will
display
the
camera
status
screen.
• Press
the
[MENU]
button
once
within
30
seconds
to
enter
the
programming
mode.