Stealth Cam STC-SNX1 Sniper-Shadow User Manual
Page 24
WWW.STEALTHCAM.COM
Toll Free 877-269-8490
24
Setting the Time Lapse Mode:
The
Time
Lapse
Default
setting
value
is
from
18:00
to
8:00
the
next
day.
When
the
camera
is
set
to
time-‐lapse
mode,
the
program
setting
will
bypass
any
PIR
activation.
Instead,
the
user
can
set
the
program
for
a
pre-‐determined
time
period
[such
as
6:00
to
18:00].
The
user
then
sets
the
frequency
of
pictures
only
(NOT
videos)
during
this
time
period
[such
as
one
picture
every
10
seconds].
The
camera
will
remain
in
Time
Lapse
mode
until
the
user
has
changed
the
program
setting.
•
Switch
the
camera
to
the
ON
position.
Ø
LCD screen will display the camera status screen.
•
Press the [MENU] button once within 30 seconds to enter the
programming mode.
•
Press [UP] button until you see the
word tLS blinking.
•
Press [OK] to confirm and go into TLS
Mode "Start Time" setting.
•
The display will show TIME + S 88:88
(S = Start, 88:88 = time in HH:MM)
•
Press [OK] to set the “Start Time”
setting.
At
this
point
you
can
adjust
the
time
from
00:00
to
23:59.