Starlight Xpress SXV-M7 User Manual
Page 25
Handbook for SXV-M7 Issue 1 June 2004
25
low control voltage drop is essential, then you will need to add a Starlight Xpress
‘relay box’ between the guider output and the input to the mount. Please contact your
local distributor if a relay box is required. Some mounts (Vixen, for example) use a
similar guider input socket, but have re-arranged connections. Details are given on our
web pages at the end of the ‘STAR2000’ section.
The autoguider installed on a 80mm refractor guide ‘scope in the author’s garden
To use the autoguider, please proceed as follows:
1)
Having started the SXV-M7 software, open the autoguider control panel by
clicking on the autoguider menu button.