Starlight Xpress SXVR-H9 - Manual (Page 11)

Handbook for the SXVR-H9 Issue 1 June 2009
11
bits), which is generally ideal for stars, but a lower stretch value is better for focusing
on planets.
Taking your first astronomical image:
I will assume that you are now set up with a focused camera attached to a telescope
with an operating sidereal drive. If so, you are now in a position to take a moderately
long exposure of some interesting deep-sky astronomical object (I will deal with
planets later). As most drives are not very accurate beyond a minute or two of
exposure time, I suggest that you find a fairly bright object to image, such as M42,
M13, M27 or M57. There are many others to choose from, but these are good
examples.
Use the finder to align on your chosen object and then centre accurately by using the
focus frame and a short exposure of between 1 and 5 seconds. The ’12-16 bit’ slider
in the focus frame allows you to adjust the image contrast if you find that the object is
too faint with a short exposure. Once properly centred and focused, take an exposure
of about 60 seconds, and observe the result. Initially, the image may appear rather
barren and show only a few stars, however, there is a great deal of data hidden from
view. You can get to see a lot of this, without affecting the image data, if you go to
the ‘View’ menu and select ‘Auto Contrast Stretch Image’. The faint image data will
then appear in considerable detail and I think that you will be impressed by the result!
If you are happy with the image, go to the ‘File’ menu and save it in a convenient
directory.
A 60 second exposure of M42 through an H-alpha filter (non-linear stretched)
Most competitive brands of CCD camera require a ‘dark frame’ to be subtracted from
your images to achieve the best results. A dark frame is simply a picture which was