SONIQ VBT50 - Manual (Page 4)

5 6
Basic Operation
Use in car
1 、Fix the provided
metal clip onto sun
visor from windscreen
towards driver position
as shown. 2、Attach the magnet
back of the handsfree
to the fixed metal clip. 3 、Press and hold the
Multifunction key for 3
seconds to switch on
the handsfree.
Use at office/home
1、Attach the metal clip to
the back of the handsfree
and put it on a flat surface. 2、Press and hold the
Multifunction key for 3
seconds to switch on the
handsfree.
Getting Started
For the first time using the handsfree, please:
Charge handsfree with the provided charger for 2 hours.
Ensure a Bluetooth function supporing mobile phone is ready for pairing.
Charging
Charge with saver Charge (cigarette light adaptor)
Switch on the handsfree.
Connect the saver charger to the in car cigarette socket, and then to the
charging port of the handsfree.
LED indicator constantly red on .
Notes:
Maximum charging time: 3hours
LED indicator stops red when fully charged.
Talking time : up to 13 hours
Standby time: up to 200 hours
Low battery signal: LED indicator flashes blue & red, 'do' sound until
handsfree is recharged .
Do not charge up to 24 hours.
Switch On /Off
Switch on handsfree
Press and hold the Multifunction Key for 3 seconds, you will hear a low to high
'dodo'sound and LED indicator flashes blue.
Switch off handsfree
Press and hold the Multifunction Key for 5 seconds,you will hear a high to low
'dodo'sound and LED indicator goes off.
Quick User Guide