Sound system connection and setup – SONIQ QV220LTI User Manual
Page 15

- 15 -
DOLBY DIGITAL (FOR DVD)
Dolby Digital is a sound system developed by Dolby Laboratories Inc. This unit automatically recognizes
DVDs that have been recorded with Dolby Digital.
Not all Dolby Digital sources are recorded with 6 channels.
Some sources marked Dolby Digital may be recorded in Dolby Surround, a 2 channel system. Look
for this logo on your unit.
Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
• Turn down the volume before connecting
headphones/earphones to the unit, then
adjust the volume to your desired level.
• When headphones/earphones are
connected, no sound will come from the
front speakers.
Note:
• Avoid listening to sound at high levels for
prolonged periods of time. This may be
harmful to you and may cause hearing
loss.
CONNECTING A PC
Connect the 15-pin D-SUB PC/VGA
connector from your computer to the
15-pin D-SUB PC/VGA input on this unit
using a monitor cable and stereo audio
cable (not included) as shown.
Make sure you connect the cable from
the computer (
PC Connector and AUDIO
- PC OUT) to this unit (MONITOR /
VGA and AUDIO - PC IN). Press the
FUNCTION button to select PC mode.
Sound System
Connection and setup
Stereo
Audio Cable
15 Pin D-SUB connector
PC
Headphones / Earphones
(1/8 [3.5mm] diameter plug)
USING HEADPHONES / EARPHONES