SONIQ QSP425T - Manual (Page 12)

- 11 -
CONNECTING A HIGH-DEFINITION (HD) SOURCE USING COMPONENT CONNECTION
High-Definition (HD) Devices with component video output must be connected to the YUV input.
Connect the component video cable and audio cable (not included) as shown.
Make sure you connect the component video cable and audio cable from the other equipment (COMPONENT VIDEO OUT and AUDIO
OUT) to this unit (COMPONENT VIDEO IN 1 and AUDIO IN 1 - YUV IN 1) / (COMPONENT VIDEO IN 2 and AUDIO IN 2- YUV IN 2) .
NOTE
When connecting a DVD player to the television, the picture resolution is dependent upon the resolution supported by the DVD player
attached. DVD player resolutions vary from 576i to 1080i, and this unit can support DVD players up to a maximum resolution of 1080i.
To COMPONENT
VIDEO IN 1 jacks
(YUV IN 1)
To COMPONENT
VIDEO OUT jacks
To AUDIO
IN jacks
(YUV IN 1)
To COMPONENT
VIDEO OUT jacks
To COMPONENT
VIDEO IN 2 jacks
(YUV IN 2)
To AUDIO
IN jacks
(YUV IN 2)
OR
HD SOURCE
With component video output
(Digital Cable Box*, Satellite Receiver*)
Y P P B R
COMPONENT
VIDEO IN
AUDIO IN
1 AUDIO
OUT
R
L
Y P P B R
COMPONENT
VIDEO OUT
VIDEO IN 1
AV/YUV IN 1
R L
/YUV/S-VIDEO
C T
HD SOURCE
With component video o utput
(Digit al Cable Box*, Satellit e R eceiver*,
or external over-the-ai r H D-Tuner) .
R L
Y P P B R
COMPONENT
VIDEO IN
YUV IN 2
AUDIO IN
2 AUDIO
OUT
R
L
Y P P B R
COMPONENT
VIDEO OUT
HD SOURCE
With component video output
(Digital Cable Box*, Satellite Receiver*)
* May require an additional
subscription for receiving pay-
TV HD channels. Check with
your cable/satellite service
provider for details.
Connections